华为交换机聚合trunk配置

作者: 都爸 | 分类: news | 浏览量: 71 | 发布时间: 2025-03-09 11:16:27

undo info-center enable

更换设备名称

[Huawei]sysname sw1

创建并进入trunk口设置

[sw1]interface Eth-Trunk 1

设置trunk口模式为lacp

[sw1-Eth-Trunk1]mode lacp-static

[sw1-Eth-Trunk1]q

进入想设置为trunk的接口

[sw1]int GigabitEthernet 0/0/18

设置此接口为trunk口

[sw1-GigabitEthernet0/0/18]eth-trunk 1

Info: This operation may take a few seconds. Please wait for a moment...done.

[sw1-GigabitEthernet0/0/18]int g0/0/21

[sw1-GigabitEthernet0/0/21]eth-trunk 1

Info: This operation may take a few seconds. Please wait for a moment...done.

已将18/21口设为trunk口